Paper Title :Process Parameters Optimization For Better Surface Roughness and Material Removal Rate of Aluminum Alloy
Author :Siluveri.Sravanthi, T.Niranjan Reddy, E.Surendar
Article Citation :Siluveri.Sravanthi ,T.Niranjan Reddy ,E.Surendar ,
(2016 ) " Process Parameters Optimization For Better Surface Roughness and Material Removal Rate of Aluminum Alloy " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 178-181,
Volume-4,Issue-10
Abstract : In this paper experiments are conducted to improve the surface finish quality and material removal rate of a
component by using carbide tips. The optimized parameter values are determined using Taguchi Method and Regression
Analysis. The machining parameters used for roughing operation are Spindle Speed – 1000rpm, 1500rpm, 2000rpm, Cut
Feed – 2000mm/min, 2500mm/min, 3000mm/min , Step Over – 20mm, 25mm, 30mm and depth of cut – 0.5mm. The
machining parameters used for finishing operation are Spindle Speed – 2000rpm, 2200rpm, 2500rpm, Cut Feed –
1000mm/min, 1200mm/min, 1500mm/min , Step Over – 5mm, 10mm, 12mm and depth of cut – 0.3mm. The milling process
is conducted on a CNC Vertical milling machine.
Type : Research paper
Published : Volume-4,Issue-10
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-5946
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 73 |
| |
Published on 2016-11-07 |
|