Paper Title :Effect of Pentagon Tool Pin Profile on Friction Stir Welding of Dissimilar Aluminum Alloy Aa6061 and Aa7075
Author :Nishit D Chaudhary, Vivek V Patel, Jay J Vora, Pratik Godhani, Rishab Banka
Article Citation :Nishit D Chaudhary ,Vivek V Patel ,Jay J Vora ,Pratik Godhani ,Rishab Banka ,
(2018 ) " Effect of Pentagon Tool Pin Profile on Friction Stir Welding of Dissimilar Aluminum Alloy Aa6061 and Aa7075 " ,
International Journal of Mechanical and Production Engineering (IJMPE) ,
pp. 45-49,
Volume-6,Issue-6
Abstract : Friction Stir Welding a variant of Friction Welding has parameters namely tool material, tool geometry, tool pin
profile, tool tilt angle, axial force, tool rotational speed and tool transverse speed. Here in the present investigation the effect
of pentagon tool pin profile is been studied on joining of dissimilar aluminum alloys AA6061 and AA7075. Tool transverse
feed is kept as 31.5 mm/min; tool rotational speed is kept as 765 rpm and tool tilt angle as 2 degrees forward. Mechanical
properties, Microstructure, Macrostructure and Temperature profile analysis is been done. Microstructure analysis has been
done with the help of Keller's Reagent. Temperature measurement is carried out by K-type thermocouple, embedded at
different depths (1.5mm, 3mm and 4.5mm) and at different positions along the longitudinal axis. Aluminum alloy AA6061 is
kept on advancing side and AA7075 is on retreating side.
Index Terms - Friction Stir welding (FSW), pentagon tool pin profile, AA6061, AA7075
Type : Research paper
Published : Volume-6,Issue-6
DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-12518
View Here
Copyright: © Institute of Research and Journals
|
|
| |
|
PDF |
| |
Viewed - 69 |
| |
Published on 2018-08-09 |
|